Danco HYR451T HydroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White (Pack of 2)

From the Manufacturer The information provided below is on a per-pack basis only.

WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: This kit easily converts a standard toilet into a dual flush toilet, which saves water by reducing the amount used with each flush. The permafit silicone seal is chlorine and chemical resistant, and will not warp.

ELIMINATES TOILET LEAKS: This kit eliminates common leaky toilet problems caused by a worn-out flapper, handle or faulty flapper chain.

HASSLE-FREE INSTALLATION: The installation can be done in 5 to 10 minutes without tools, and does not require tank removal. The kit has an adjustable height of 11-13.8 inches.

TOILET FLUSH VALVE COMPATIBILITY: The Dual Flush Converter works with standard 2-inch flush valves and requires a minimum clearance of 10 inches from the highest point of the flush valve opening to the inside of the tank lid. It is NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products, the HYR271 Dual Flush Converter and the HC630 HydroClean fill valve, to increase your toilet's efficiency.

DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting, which uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at the end is the Full Flush, which uses the normal amount of water for solids.

IMPORTANT INSTALLATION TIP: Do not remove the overflow tube and flush valve from the toilet tank; the Dual Flush Converter is a replacement for the existing flapper. Slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.

DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: The kit detects leaks and signals when a leak is found. The Total Repair Kit can also be calibrated to adjust the exact amount of water needed, which saves water.

product information: